• Processes up to 10 sheets per minute
• Up to 6 slits, 25 cuts, and 20 creases in a single pass
• Standard PC Controller software for easy job setup and unlimited job storage
• Built-in CCD scanner reads barcodes and registration marks
• Standard perforation unit
Duplo DC-616PRO
The Duplo DC-616 PRO Slitter/Cutter/Creaser is the perfect finishing solution for the short-run, on demand digital printer. Designed to remove white borders and prevent toner cracking on digital color documents, this all-in-one finisher can process up to 6 slits, 25 cuts, and 20 creases in a single pass - bringing efficiency and automation to your post-press operation.
Features & Benefits
Specifications
Dimensions (L x W xH):
1600mm x 620mm x 1050mm
Weight:
150kg
Power Supply/Consumption:
230V AC, 50Hz / 100W (0.7 Amp)
Input Paper Size Min:
210mm wide x 210 long
Input Paper Size Max:
320mm wide x 650mm* long (330.5 x 999mm - extended)
Finished Paper Size:
Width: 48mm, Length: 50mm (45mm - extended)
Paper Weight Min:
110gsm
Paper Weight Max:
350gsm
Paper Curl:
Within +/- 3mm
Paper Type:
Uncoated paper, coated paper, laminated paper
Capacity:
100mm
Type:
Top feed / belt suction
Number:
6 x rotary slitting knives (2 x side trim, 4 x centre slitter) (programmable in 0.1mm increments)
Margin Slit:
3.2mm - 55mm from paper side edges
Gutter Deflector:
5mm x 15mm strips. Gutter slits wider than above will be delivered on to the exit tray. Max 2 deflectors per document
Tolerance:
Finishing size +/- 0.3mm (business card +/- 0.4mm)
Number:
1 x creasing rule across paper direction
Maximum:
20 creases (programmable in 0.1mm increments)
Crease Depth Adjustment:
3 steps (from control panel)
Tolerance:
Finishing size +/- 0.3mm
Number:
1 x cross knife
Maximum:
25 cuts (programmable in 0.1mm increments)
Lead Edge Cut:
Minimum 3.2mm
Gutter Cut:
Minimum 4mm
Trail Edge Cut:
Minimum 5mm
Tolerance:
Finishing size +/- 0.3mm (business card +/- 0.4mm)
Paper Weight Max:
300gsm
Number:
2 Rotary Tools (15tpi)
Positioning:
Manual